DURAMEDIA® Plastic

Product Page Plastic MediaDURAMEDIA® Plastic is a polyester resin vibratory media that is available in low density, high density, and high performance formulations. The unique bonding system creates a resilient material known for its extended product life and consistent performance when mass finishing. DURAMEDIA® Plastic is used in applications such as; deburring, flash removal, surface metal removal, and fine finishing. The shapes available for this product are: triangles, angle cut triangles, cylindrical cones, pilgrim cones, round top cones, taper top cones, three sided pyramids, diamond shaped pyramids, stars, ellipses, triangles, and wedges.

DPLD – DURAMEDIA® Plastic Low Density

Low density plastic media has been formulated for a wide variety of applications. This general purpose media can be used for deburring, flash removal, burnishing and preplate finishing.

 

 

DPHD – DURAMEDIA® Plastic High Density

High density plastic media is designed for superior cut and stock removal on both ferrous and non-ferrous metals. In most instances this high density media reduces cycle times and provides vastly improved finishes in applications ranging from deburring of hard metals to fine finishes on intricate parts.

 

 

DPHP – DURAMEDIA® Plastic High Performance

High performance plastic media has been formulated for use in specific applications involving ferrous metals. This media will provide a dramatic improvement in surface finishes with the impact resistance of a plastic body, which significantly decreases fracturing and impingement.

 

 

DURAMEDIA® Plastic Low Density 10

DURAMEDIA® Plastic Low Density 10 (DPLD 10) is a low density resin-bonded plastic media that produces a low micro-inch preplate finish with very mild cutting action. (68 lbs. /cubic foot, color: blue)

Applications

DPLD 10 is used for buffing, burnishing, or plating to create a smooth, clean, and reflective finish.

DURAMEDIA® Plastic Low Density 10 SDS

 

 

DURAMEDIA® Plastic Low Density 30

DURAMEDIA® Plastic Low Density 30 (DPLD 30) is a fast cutting resin-bonded plastic media that provides a very bright low micro-inch finish. (75 lbs. /cubic foot, color: maroon)

Applications

DPLD eliminates two step operations where buffing or plating of parts is required.

 

 

DURAMEDIA® Plastic Low Density 40

DURAMEDIA® Plastic Low Density 40 (DPLD 40) is a general purpose resin-bonded plastic media for all ferrous and non-ferrous metals. It is fast cutting and provides a smooth matte finish. (68 lbs. /cubic foot, color: dark green)

Applications

DPLD is ideal for removing burrs, flash, and die marks and blending parting lines easily.

DURAMEDIA® Plastic Low Density 40 SDS

 

 

DURAMEDIA® Plastic Low Density 40 MC

DURAMEDIA® Plastic Low Density 40 MC is resin-bonded plastic media, and the more aggressive variation of our standard 40 formula. It produces a similar matte finish and covers all the ground of 40 but with a slightly faster cycle time. (70 lbs. /cubic foot, color: green)

Applications

DURAMEDIA® Plastic Low Density 40 MC is ideal for removing burrs, flash, and die marks and blending parting lines easily and in shorter cycle times than DPLD 40.

 

 

DURAMEDIA® Plastic High Density 130

DURAMEDIA® Plastic High Density 130 (DPHD 130) is a fast cutting resin-bonded plastic media that provides a low matte finish. (88 lbs. /cubic foot, color: light blue)

Applications

DPHD 130 is used for deburring and surface metal removal on ferrous and non-ferrous metals. It also reduces cycle times and gives a preplate finish. 

 

 

DURAMEDIA® Plastic High Density 130EZ

DURAMEDIA® Plastic High Density 130EZ (DPHD 130EZ) is a fast cutting resin-bonded plastic media. (90 lbs. /cubic foot, color: light green)

Applications

Designed to work with the most difficult alloys, DPHD 130EZ can be used across the spectrum of ferrous and non-ferrous metals whenever cycle time is the primary driver. 

DURAMEDIA® Plastic High Density 130EZ SDS

 

 

DURAMEDIA® Plastic High Performance 230FC

DURAMEDIA® Plastic High Performance 230FC (DPHP 230FC) is an aggressive fast cutting resin-bonded plastic media for increased production with reduced cycle times. (77 lbs. /cubic foot, color: dark brown)

Applications

DPHP 230FC is ideal for removing machine lines and forming radius on hard metals.

 

 

DURAMEDIA® Plastic High Performance 250FC

DURAMEDIA® Plastic High Performance 250FC (DPHP 250FC) is the most aggressive cutting resin-bonded plastic media. It is suited for parts that are to be welded or brazed. (78 lbs. /cubic foot, color: dark blue)

Applications

DPHP 250FC’s applications include deburring and surface removal on all ferrous metals.

 

 

DURAMEDIA® Plastic High Performance 310MC

DURAMEDIA® Plastic High Performance 310MC (DPHP 310MC) is a non-aggressive resin-bonded plastic media that provides a very minimal cut. It produces a matte finish with virtually no stock removal. (60 lbs. /cubic foot, color: black)

Applications

DPHP 310MC is ideal for use with chemical accelerants and as a driver of loose abrasives.

 

 

DURAMEDIA® Plastic High Performance 350MC

DURAMEDIA® Plastic High Performance 350MC (DPHP 350MC) is a high performance resin-bonded plastic media that produces an extremely low micro-inch finish with mild cutting action. (60 lbs. /cubic foot, color: gray)

Applications

DPHP 350MC is primarily used on ferrous metals that require an extremely fine finish and will be plated, welded, or brazed.

 

 

Contact Information

Washington Mills Ceramics Corporation
165 King Street
Sun Prairie, WI 53590

Toll Free:
888-676-1846
608-837-5155 (direct)

Fax:
608-837-0808

Email:
ceramicsales@washingtonmills.com